The Hybrid Ovation woofer utilizes the new Uniflow aluminum die-cast chassis. Its aerodynamic design minimizes sound reflection distortion and increases the woofer's overall performance. The low-profile flat spider provides greater support and stability to the voice coil and cone during the most demanding operating conditions. The Hybrid Ovation woofer futures a 54mm (2 1/8") diameter Hexatech voice coil and supports a one-piece DPC shallow cone, enabling the loudspeaker profile to remain low while preventing cone breakup distortion at high levels.
The Hybrid Ovation woofers are available in 4", 5" and 6" diameter.
| SPECIFICATIONS |
HYBRID OVATION 4" WOOFER |
HYBRID OVATION 5" WOOFER |
HYBRID OVATION 6" WOOFER |
| Nominal Impedance |
4 Ohm |
4 Ohm |
4 Ohm |
| Power Handling |
100W |
150W |
160W |
| Max. Transient Power Handling |
300W |
500W |
600W |
| Sensitivity (2.83V/1M) |
89dB |
91dB |
91dB |
| Frequency Response |
50-4200Hz |
35-3000Hz |
35-3000Hz |
| FS |
82Hz |
60Hz |
55Hz |
| Voice Coil Diameter |
54mm (2.1") |
54mm (2.1") |
54mm (2.1") |
| Voice Coil Height |
10.5mm (0.41") |
10.5mm (0.41") |
10.5mm (0.41") |
| Voice Coil Type/Former |
Aluminum |
Aluminum |
Aluminum |
| Voice Coil Wire |
Hexatech Aluminum |
Hexatech Aluminum |
Hexatech Aluminum |
| DC Resistance |
4.2 Ohm |
3.7 Ohm |
3.2 Ohm |
| Voice Coil Inductance @1kHz |
0.34MH |
0.31MH |
0.24MH |
| Magnet System |
Hybrid rear vented |
Hybrid rear vented |
Hybrid rear vented |
| HE-Magnetic Gap Height |
5mm (0.2") |
5mm (0.2") |
5mm (0.2") |
| B-Flux Density |
0.85T |
1T |
1T |
| BL Product/BXL |
5.92 |
4.33 |
4.47 |
| Max. Linear Excursion/Xmax |
5.5mm (±2.75mm) |
5.5mm (±2.75mm) |
5.5mm (±2.75mm) |
| Suspension Compliance CMS |
551 |
921 |
870 |
| Mechanical Q Factor QES |
0.41 |
0.55 |
0.49 |
| Total Q Factor Q/T |
0.35 |
0.45 |
0.42 |
| QMS |
2.44 |
2.54 |
2.69 |
| Mechanical Resistance RMS |
0.68kgS¹ |
0.52kgS¹ |
0.60kgS¹ |
| Moving Mass MMS |
6.48gr (0.23oz) |
7gr (0.25oz) |
9.3gr (0.33oz) |
| Equivalent Car Air Load VAS |
3.17L (0.11ft³) |
10.5L (0.37ft³) |
17.3L (0.61ft³) |
| Effective Pison Area SD |
64cm² (9.92in²) |
90cm² (13.95in²) |
119cm² (18.45in²) |
| Cone Type |
One-piece formed |
One-piece formed |
One-piece injected |
| Cone Material |
DPC |
DPC |
DPC |
| Unit Diameter |
104mm (4") |
135mm (5¼") |
165mm (6½") |
| Mounting Depth |
50mm (2") |
60mm (2.36") |
61mm (2.37") |
| Mounting Cutout |
95mm (3.74") |
120mm (4.72") |
141mm (5.55") |
| Net Weight |
0.53kg (1.17lb) |
0.60kg (1.32lb) |
0.73kg (1.61lb) |
