HE
Search results
×
B4EE9002-F454-422F-B3CF-389ABAD8C8FFSVG Created with sketchtool.

Hybrid MKII Woofer

All of the Hybrid MW models incorporate Morel’s core technologies. A 2 ¼” Aluminum Hexatech Extrenal Voice Coil wound on an aluminum former enables stable, efficient and linear piston-like movement which effectively reduces distortion levels.
Morel’s optimized one-piece DPC cone forms a flat geometric plane that improves sound dispersion and dynamics, creating a realistic three-dimensional sound presentation.
The new Hybrid woofers’ suspension improves the mechanical movement and stability of the membrane, attributing it to very low distortion level at high power and better low frequency dynamic range.
The Hybrid MW woofers innovative design is key to the powerful transient sound quality it delivers.

Clear
529$
Find a Dealer

Technology

DPC cone

DPC, or Damped Polymer Cone, is a direct derivative of the cones Morel has built its reputation upon. With high self-damping characteristics, this cone provides exceptional sound quality without coloration or harshness.

Hybrid magnet motor

The Hybrid motor drive system uses a ferrite magnet together with a very powerful neodymium magnet. Combined they create a compact, lightweight motor system that is up to four times more powerful than conventional designs of the same size. With Hybrid, more amplified power is converted into sonic energy for flawless performance, even in a small driver.

Hexatech™ Aluminium Voice Coil

Made from 100% aluminum wire shaped like a honeycomb, the Hexatech™ voice coil reduces air gaps in the coil windings, thereby increasing efficiency by up to 20%. Being lightweight, Hexatech™ voice coils are largely responsible for the extraordinary fast transient response Morel drive units are known for.

Specifications

HYBRID MW5 MKII HYBRID MW6 MKII INTEGRA 52 INTEGRA 62
Nominal Impendance (ohm) 4 4 4 4 4
Power Handling Wrms 120 140 90 100
Max. Trans. Pwr Handling Wrms 500 600 250 300
Sensitivity (2.83 V/1M) dB 90 91 90dB 91dB
Frequency response Hz 45 - 3000 35 - 3000
Resonant Freq. Fs Hz 56 45 82 75
Voice Coil Diameter mm (inch) 54 (2.1) 54 (2.1) 54 (2.1) 54 (2.1)
Voice Coil Height mm (inch) 10.50 (0.41) 11 (0.47) 12
Voice Coil Type/Former Aluminium Aluminium Aluminium Aluminium
Voice Coil Wire Hexatech™ Aluminium Hexatech™ Aluminium Hexatech™ Aluminium Hexatech™ Aluminium
DC Resistance (ohm) 3 3 3.3 3.3
Voice Coil Induct. @1 kHz (mH) 0.21 0.22 0.26 0.31
Magnet System Hybrid rear vented Hybrid rear vented Neodymium Neodymium
HE-Magnetic Gap Height mm (inch) 4 (0.16) 4 (0.16) 5 (0.20) 5 (0.20)
B-Flux Density (T) 0.83 0.83 0.9 0.85
BL Product/BXL 4.2 4.2 5.16 4.65
Max. Linear Ex./Xmax mm (inch) 7 ± 3.5mm (0.28 ± 0.14) 7 ± 3.5mm (0.28 ± 0.14) 5.50 ± 2.75mm (0.22 ± 0.11) 7 ± 3.5mm (0.28 ± 0.14)
Suspension Compliance CMS - mm/N 0.78 1.1 0.6 0.42
Electrical Q Factor QES 0.59 0.56 0.39 0.67
QTS 0.45 0.44 0.32 0.54
QMS 1.8 2.08 1.85 2,86
Mech. Resistance RMS- N . S / M 1.96 1.5 1.7 1.52
Moving Mass MMS - gr/ounce 9.9 11 6.11 8.12
Equiv. Can Air Load VAS - L (cu.ft3) 8.87 (0.31) 21 (0.74) 2,72 (0.37) 3.80 (0.13)
Effective Piston Area SD sq.cm (sq.inch) 90 (13.95) 119 (18.45) 57 (8.83) 80 (37.8)
Cone Type One-piece formed One-piece formed Formed Paper Formed Paper
Cone Material DPC DPC Composite Cellular Fiber Composite Cellular Fiber
Unit Diameter mm(inch) 135 (5.25) 165 (6.50) 135 (5.25) 165 (6.5)
Mounting Depth mm (inch) 60 (2.36) 61 (2.40) 60 (2.36) 61 (2.40)
Mounting Cutout 120 (4.72) 141 (5.55) 120 (4.72) 141 (5.55)
Net Wight Kg (lb) 0.60 (1.32) 0.60 (1.32) 0.60 (1.32) 0.75 (1.65)

JOIN OUR NEWSLETTER

Copyright © morelhifi.com All rights reserved.