HE
Search results
×
B4EE9002-F454-422F-B3CF-389ABAD8C8FFSVG Created with sketchtool.

Elate Carbon 3-Way

The Elate Carbon shares most of its high-end componentry with its Pro siblings, yet takes a slightly more sensible approach. These 2-way and 3-way systems were designed for those who want the ultimate performance but are looking for a discreet tweeter. The compact design of the MT450 tweeter allows users the option to place the speaker in most factory locations, or into space-limited areas using the supplied mounts. It may be small in size, but the MT450’s Acuflex coated silk dome, open cavity design and dual neodymium magnet motor give it amazing detail and a silky-smooth, flat frequency response.

 All Elate Carbon 3-way systems receive the all new MM3 3.5″ cone midrange. This small midrange uses the best of Morel’s technology, including EVC motor, high power 2.1” diameter voice coil, and highly damped carbon- fiber/Rohacell cone, allowing it to play lower in frequency and with greater control than most 4.5” speakers. It also handles some serious power. These attributes drastically improve system performance while enabling them to fit in most factory midrange locations.

 The Elate Carbon would not be complete without exercising their power. Whether using a 5.25”, 6.5” or 9-inch system, each of the woofers feature Klipple optimized EVC motors with large 3-inch diameter voice coils and carbon fiber/Rohacell sandwich cones for ultra-low distortion and high power handling levels. 

 The vast feature set and design of the new Elate Carbon allow them to blow away your every expectation.

This product is currently out of stock and unavailable.

Technology

Titanium Voice coil former

The bobbin material has an influence on the acoustical parameters of the driver, its power handling and the reproduced sound quality. By using titanium bobbin, Morel intended to raise the Mechanical Factor (QMS) in order to enable a wider selection of enclosure types and sizes. As for the sound quality, one is able to discern a distinctively “crisper” sound when compared to an equivalent driver with an aluminum bobbin. The rigid characteristic of titanium, along with its other advantages produces a driver that is tonally balanced and accurate, with an exceptionally fast transient response.

EVC motor

Morel speakers with EVC™ technology utilize voice coils that are up to three times larger than those used in conventional loudspeakers. The EVC™ design moves the magnetic drive system within the voice coil, eliminating stray magnetic flux by effectively directing all the magnetic energy to the voice coil. The result is an ultra-efficient and powerful design, that is highly compact with efficient heat dissipation and reduced cone breakup for lower distortion.

Handcrafted Acuflex soft dome

A specially engineered damping compound applied to the soft domes of specific Morel tweeters and midranges. The combination of these materials creates a diaphragm that exhibits controlled canceling break up (accurate–flexing), meaning each break-up mode is counteracted by another in the opposite direction. This cancellation of break-up modes leaves nothing but the pure, natural sound Morel tweeters and midrange are famous for.

Lotus Grille

The new Morel grille has a specific pattern of holes in different shapes and diameters engineered to minimize the “horn” effect (high-frequency peak caused by the resonant frequency of multiple same-size holes). Innovative metal processing enabled the construction of a very thin nearly transparent grille that hardly affects the sound at all frequencies whilst maintaining structural integrity to protect the drivers.

The Lotus grille is a registered design protecting Morel’s intellectual property.

C.A.R filter

Controlled Acoustic Resistance – In most automotive applications, speakers are installed in a virtual free-air environment, such as a door, which provides minimal acoustic loading. The C.A.R. Filter™ improves the acoustic loading by controlling airflow within the driver, mimicking the effects of a cabinet while improving power handling by 30%. This provides greater control over the cone movement for improved bass dynamics.

DMM motor

Morel’s double drive system generates more magnetic energy than a single magnet of similar size, increasing efficiency and the dynamic range. The position of the secondary magnet fixed above the top plate in the motor is the key in controlling stray magnetic flux, thus generating a more focussed magnetic field while also contributing to the “shielded” characteristic of our speakers.

Specifications

MODEL Size &
Configuration
Power Handling (Wrms) / Peak
Power (W)
Sensitivity(2.83V/1M)
(dB)
Frequency Response
(Hz)
Crossover
Elate Carbon 53 5¼” 3-way 160 / 1000 85 40-25000 MXT380C
Elate Carbon 53A 5¼” 3-way 160 / 1000 85 40-25000
Elate Carbon 63 6½ 3-way 180 / 1000 87 30-25000 MXT380C
Elate Carbon 63A 6½ 3-way 180 / 1000 87 30-25000
Elate Carbon 93 8¾ 3-way 200 / 1000 89 25-25000 MXT380C
Elate Carbon 93A 8¾ 3-way 200 / 1000 89 25-25000

Info & Documentation

JOIN OUR NEWSLETTER

Copyright © morelhifi.com All rights reserved.