HE
Search results
×
B4EE9002-F454-422F-B3CF-389ABAD8C8FFSVG Created with sketchtool.

Elate Carbon Woofer

Not all drivers are created equal, and the visually inspiring Elate Carbon woofers were developed with next level performance in mind. These new drivers get their Carbon moniker from their triple layer cones from which they are derived, consisting of two layers of carbon fiber sandwiching a Rohacell foam core. These proprietary cones were developed to give them incredible stiffness, high damping and light weight—the trifecta for cone performance.

Paired with a large 3-inch diameter Hexatech aluminum voice coil, titanium former, and Morel’s EVC motor technology, the Elate Carbon achieves remarkable control and low distortion.  which translates to highly transparent and bass-rich sound reproduction.  

Few speakers can match the midrange purity and rich bass performance of the Elate Carbon Pro woofers.

This product is currently out of stock and unavailable.

Technology

EVC motor

Morel speakers with EVC™ technology utilize voice coils that are up to three times larger than those used in conventional loudspeakers. The EVC™ design moves the magnetic drive system within the voice coil, eliminating stray magnetic flux by effectively directing all the magnetic energy to the voice coil. The result is an ultra-efficient and powerful design, that is highly compact with efficient heat dissipation and reduced cone breakup for lower distortion.

Carbon Fiber Cone

Derived from the drivers of our award-winning fat lady speaker system, this cone design is comprised of two exterior carbon fiber skins sandwiching a layer of Rohacell, a high strength, featherweight foam. The combination forms a cone that is light, strong and properly damped for naturally uncolored audio reproduction.

Hexatech™ Aluminium Voice Coil

Made from 100% aluminum wire shaped like a honeycomb, the Hexatech™ voice coil reduces air gaps in the coil windings, thereby increasing efficiency by up to 20%. Being lightweight, Hexatech™ voice coils are largely responsible for the extraordinary fast transient response Morel drive units are known for.

Specifications

Elate Carbon MW5 Elate Carbon MW6 Elate Carbon MW9
Nominal Impendance (ohm) 4 4 4 4
Power Handling Wrms 160 180 200
Max. Trans. Pwr Handling Wrms 1000 1000 1000
Sensitivity (2.83 V/1M) dB 85 87 89
Frequency response Hz 40 - 5000 30 - 4000 25 - 3000
Resonant Freq. Fs Hz 64.4 45 44
Voice Coil Diameter mm (inch) 75 (3) 75 (3) 75 (3)
Voice Coil Height mm (inch) 14.50 (0.57) 14.50 (0.57) 14.50 (0.57)
Voice Coil Type/Former Titanium Titanium Titanium
Voice Coil Wire HexatechTM Aluminium HexatechTM Aluminium HexatechTM Aluminium
DC Resistance (ohm) 3.6 3.6 3.6
Voice Coil Induct. @1 kHz (mH) 0.615 0.615 0.615
Magnet System Double magnet rear vented Double magnet rear vented Double magnet rear vented
HE-Magnetic Gap Height mm (inch) 5 (0.20) 5 (0.20) 5 (0.20)
B-Flux Density (T) 0.66 0.75 0.74
BL Product/BXL 5.15 6.51 5.15
Max. Linear Ex./Xmax mm (inch) ±4.75mm (0.18) ±4.75mm (0.18) ±4.75mm (0.18)
Suspension Compliance CMS - mm/N 0.35 0.67 0.36
Electrical Q Factor QES 0.63 0.47 0.61
QTS 0.56 0.43 0.56
QMS 4.15 7.19 6
Mech. Resistance RMS- N . S / M 1.32 1 1.2
Moving Mass MMS - gr/ounce 18 (0.63) 18 (0.63) 30 (1.05)
Equiv. Can Air Load VAS - L (cu.ft3) 4.5 (0.6) 13.3 (0.47) 30.9 (1.1)
Effective Piston Area SD sq.cm (sq.inch) 90 (13.95) 120 (18.6) 219 (33.95)
Cone Type One-piece formed One-piece formed One-piece formed
Cone Material DPC DPC DPC
Unit Diameter mm(inch) 135 (5.25) 165 (6.50) 222 (8.75)
Mounting Depth mm (inch) 60 (2.36) 61 (2.40) 71 (2.80)
Mounting Cutout 120 (4.72) 141 (5.55) 192 (7.56)
Net Wight Kg (lb) 1.05 (2.31) 1.18 (2.60) 1.42 (3.13)

JOIN OUR NEWSLETTER

Copyright © morelhifi.com All rights reserved.